D-Link DCS-5220

8D-Link DCS-5220 Quick Install Guide
Configuration
The D-Link DCS-5220 uses the Installation Wizard as the management
software. The wizard provides the user an easy interface to change
any settings related to the Wireless PT Internet Camera. Clicking on
the Installation Wizard icon will start the wizard.
The Installation Wizard will appear
and show the MAC address of the
DCS-5220 and an IP Address. If
you have a DHCP* server on your
network, there will be a valid IP
Address displayed here, indicated
by a “Yes” under the assigned
column.
*A DHCP server is a device that
supplies IP Addresses to its clients,
which are on the same network.
D-Link Installation Wizard
This section will show you how to congure your new D-Link Wireless
PT Internet Camera using the D-Link Installation Wizard.
Configuration