1
Quick Installation Guide
DCS-6620
PTZ Internet Camera
Package Contents
If any of the items are missing, please contact your reseller.
DCS-6620
PTZ Internet
Camera &
Remote
Control
CD-ROM with
Manual and
Software
A/V Cable &
Category 5
Ethernet Cable
Power Adapter Camera Stand
Hardware Installation
Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector
located on the Internet Camera’s back panel and attach it
to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input
connector located on the Internet Camera’s back
panel(labeled DC 12V) and connect it to an AC power
outlet.
Both the red and green LEDs will flash alternately and only
the red LED will remain lit. The green LED will not come
on until you have configured your camera.
If you already connect your device correctly, please refer to the Manual in the CD for
software utility installation step by step. You will install a software and use it to search and
connect the camera.
To Next Page
Loading...
Need help?
General