Need help?Do you have a question about the D-Link DCS-942L and is the answer not in the manual?
General| Total megapixels | 0.3 MP |
|---|---|
| Maximum resolution | 640 x 480 pixels |
| Supported video modes | - |
| Video formats supported | H.264, M-JPEG, MPEG4 |
| Power LED | Yes |
| Networking features | Ethernet, Fast Ethernet, 802.11b/g/n WLAN |
| Still image resolution(s) | 640 x 480 |
| Sensor type | CMOS |
| Optical sensor size | 1/5 \ |
| Optical zoom | - x |
| Focal length range | 0 - 3.15 mm |
| White balance | Auto |
| Camera shutter type | Electronic |
| Minimum illumination | 1 lx |
| Form factor | Cube |
| Product color | White |
| Certification | FCC B, IC, C-Tick, CE |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Ethernet LAN (RJ-45) ports | 1 |
| Windows operating systems supported | Windows 7 Home Premium, Windows Vista Home Premium, Windows XP Home |
| AC input voltage | 100-240 V |
| DC output current | 1.2 A |
| DC output voltage | +5V |
| AC input frequency | 50 - 60 Hz |
| Power over Ethernet (PoE) | No |
| Power consumption (typical) | 5.5 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| LED type | IR |
| Night vision distance | 5 m |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Supported network protocols | IPV4, ARP, TCP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (DynDNS & D-Link) SMTP Client, FTP Client, HTTP Server, PPPoE, UPnP, LLTD |
| Security algorithms | WEP, WPA, WPA2 |
| Flash memory | 16 MB |
| Internal memory | 128 MB |
Weight and Dimensions| Depth | 60 mm |
|---|---|
| Width | 34.85 mm |
| Height | 96 mm |
| Weight | 78.1 g |
Easy setup method using mydlink-enabled routers.
Step-by-step guide for installing the camera via CD.
How to access and use the camera's web interface for settings.
Configures IP address, subnet mask, gateway, and DNS.
Configures Wi-Fi network name, security, and encryption.
Sets up video clips and SD card recording based on triggers.
Configures motion and sound triggers for alerts and recording.
Covers admin, users, firmware, system, status, and logs.
Explains WPA2-PSK, WPA-PSK, and WEP security types.
Enables remote access by opening network ports.
Solutions for issues with accessing the camera remotely.
To Next Page