D-Link DCS-942L - SD Recording

44D-Link DCS-942L User Manual
Section 3 - Conguration
SD Recording
This option allows you to congure and set a schedule for the recording to an inserted microSD card.
SD Recording:
Trigger by:
Recording Type:
Keep Free Space:
Cyclic:
Check this box to enable the recording feature.
Select whether the event is activated by Motion, Schedule, or if the video is
Always recording.
• Motion: Enables recording when motion is detected. You can limit motion-
triggered recording to a specic schedule by selection Only during and
entering the times you want motion-triggered recording to be enabled.
• Schedule: Enables recording according to a schedule. Enter the times you
want the camera to record.
• Always: This will enable continuous recording to the microSD card.
• Sound: Enables recording when sound is detected. You can limit sound-
triggered recording to a specic schedule by selection Only during and
entering the times you want sound-triggered recording to be enabled.
You can choose to record snapshots or video. For more on video prole options,
refer to “Audio and Video” on page 37.
Set amount of space to keep free on the microSD card.
When this option is selected, it will cause the oldest snapshot/video les to be
deleted when the system requires storage space for new snapshot/video les.
Click Save Settings to save your changes.