34D-Link DCS-942L User Manual
Section 3 - Conguration
Wireless Setup
This section allows you to set up and congure the wireless settings on your camera.
This is the Service Set Identier, an identier for your wireless network.
The drop down menu lists all the wireless networks that the camera was able to
detect. Click Rescan to scan for wireless networks again.
Use Infrastructure if you are connecting your camera to a wireless router or
access point. Use Ad-Hoc if you are wirelessly connecting to your PC without a
wireless router or access point.
For security, there are three choices; None, WEP, and WPA-PSK / WPA2-PSK.
Select the same encryption method that is being used by your wireless device/
router.
If you chose WPA-PSK or WPA2-PSK, choose whether to use TKIP or AES.
Enter the key(password) for your wireless network. Check the Show Hidden
Key box to reveal the password you have entered.
Click the Save Settings button to save your changes.
Network Name:
Site Survey:
Wireless Mode:
Security Mode:
Cipher Type:
Key:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
