D-Link Systems, Inc. 9
DCS-6620 Install Guide Camera Configuration
Camera Configuration
The software will search for cameras.
Double-click on the Installation
Wizard icon, which should have
been created on your desktop.
The Installation Wizard will now show
a MAC address of the DCS-6620 and
an IP Address (which may or may not
be correct depending on what you
have your DCS-6620 connected to).
If you have a DHCP* server on your
network, there
will be a valid IP Address
displayed
here. After a few seconds, the
“assigned” column will display yes
,
indicating that the displayed IP
Address
is now assigned to the camera.
*A DHCP server is a device that supplies IP Addresses to
its clients that are on the same network.
To Next Page
Loading...
