26
Q16: Does DCS-8000LH support Bluetooth? How it works?
Yes, DCS-8000LH supports BLE 4.0. Please turn on the Bluetooth function during camera installation.
Q17: How can I update the firmware?
mydlink Lit App will pop-up the information once, if DCS-8000LH has newer firmware can be updated. You
can follow the instructions.
The mydlink Lite application compares the installed FW version on the registered cameras to the latest
version available for each model. If a newer version is detected, the mydlink service will give customers a
prompter and push the new firmware to the camera.
Before updating the firmware, make sure you are near a known Wi-Fi network and remain on the same
network for the time it takes to update the firmware. If a D-Link camera firmware update fails due to a
broken network connection during the firmware upload or power loss during the firmware
upload/installation, it is possible that the network camera will be rendered unusable. Unfortunately, no
self-help procedure exists that will restore network cameras that are subject to this type of failure. Your
only recourse following this type of network camera failure is to contact your regional D-Link customer
To Next Page
Loading...
