D-Link DCS-820L User Manual

20D-Link DCS-820L User Manual
Section 3: Monitoring
Monitoring
mydlink Baby App Home Screen
Once the setup process is complete, you will see the mydlink Baby app Home Screen.
1
1 Login Tap on the mydlink Login icon to remotely access your DCS-820L.
2 DCS-820L Tap on the Wi-Fi Baby Camera image to access Live View. Refer to "mydlink Baby App Live View" on page 21.
3 Refresh Tap on the Refresh icon to scan for Wi-Fi Baby Cameras on your network that have not yet been added to the app.*
4 Camera Setup Wizard Tap on Camera + icon to set up an additional DCS-820L.
5 ? Tap on the Question Mark icon for FAQs (frequently asked questions).
6 Join mydlink If you have not registered the camera with mydlink, you will see this box. Tap on the + sign to join mydlink.
7 Alert Icons
A number will appear by an alert icon for notication, signifying when sound or motion is detected.
(To reset alerts, tap on the alert icon.)
2
3
5
4
7
6
*Note: When you log in, the refresh icon will change, allowing you to access the control for push notication. Refer to question 12 of "Troubleshooting" on page 31.

D-Link DCS-820L Specifications

General

Certification	CE, CE LVD, FCC, C-Tick
Maximum range	5 m
Motion sensor	Yes
Smartphone support	-
Compatible products	iPhone, iPad
Number of lullabies	5
Video compression formats	H.264
Mobile operating systems supported	Android 4.1, Android 4.2, Android 4.3, Android 4.4, iOS 6.0
Product color	White
Compatible memory cards	MicroSD (TransFlash)
Sensor type	CMOS
Fixed aperture	2 mm
Video resolutions	320 x 240, 640 x 480 pixels
Fixed focal length	2.5 mm
Optical sensor size	1/5 \
Minimum illumination	0 lx
Interface	Wi-Fi
Wi-Fi standards	Wi-Fi 4 (802.11n)
Depth	86 mm
Width	92 mm
Height	120 mm
Power supply	5.1 W
Dimensions (WxDxH)	92 x 86 x 120 mm
Maximum number of cameras supported	1
AC input voltage	5 V
Power source type	DC, USB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C