D-Link DCS-820L User Manual

24D-Link DCS-820L User Manual
Section 4: Conguration
• Under Lullaby…
Select how long the lullaby will play (in minutes)
when activated
• Under Events…
Check ambient sound level. This level number
will change depending on how noisy the
background is
Change Sound Detection level. Set the Sound
Detection Level higher than the Current Level
to receive alerts when noise exceeds the
current level. You can put the Detection Level
at the highest setting to disable sound alerts
- a higher detection level means less noise is
required to trigger an event
Change motion detection sensitivity. You can
also put sensitivity at the lowest setting in
order to disable motion alerts

D-Link DCS-820L Specifications

General

Certification	CE, CE LVD, FCC, C-Tick
Maximum range	5 m
Motion sensor	Yes
Smartphone support	-
Compatible products	iPhone, iPad
Number of lullabies	5
Video compression formats	H.264
Mobile operating systems supported	Android 4.1, Android 4.2, Android 4.3, Android 4.4, iOS 6.0
Product color	White
Compatible memory cards	MicroSD (TransFlash)
Sensor type	CMOS
Fixed aperture	2 mm
Video resolutions	320 x 240, 640 x 480 pixels
Fixed focal length	2.5 mm
Optical sensor size	1/5 \
Minimum illumination	0 lx
Interface	Wi-Fi
Wi-Fi standards	Wi-Fi 4 (802.11n)
Depth	86 mm
Width	92 mm
Height	120 mm
Power supply	5.1 W
Dimensions (WxDxH)	92 x 86 x 120 mm
Maximum number of cameras supported	1
AC input voltage	5 V
Power source type	DC, USB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C