D-Link DCS-8302LH

16D-Link DCS-8302LH User Manual
Section 3 - mydlink
1 Device Name Tap to change the device’s name.
2 Privacy Mode Tap to enable. Privacy mode will disable the camera feed.
3
Motion and Person
Detection
Tap to set the Motion and Person Detection area and sensitivity settings.
4 Siren Timeout
Set the auto-off timer for the siren. This setting will apply to manual
operation and Automations.
5 Storage
Tap to change the video clips storage location from the microSD card to the
cloud. You can also subscribe to mydlink Cloud from here and view your
current subscription plan.
6 Camera Microphone
Tap to enable or disable picking up sound near your camera in live view
and recordings.
7 Night Vision Tap to change night vision detection to On, O or Auto.
8 Anti-Flicker
Reduces icker in the video. Tap 50 Hz or 60 Hz depending on the frequency
of your lights.
9 Status LED Disabling this will turn o the LED until you turn it back on.
10 Designated Contact
Tap here to add, remove, or edit designated contacts that appear in the
rich notication.
11 Wi-Fi
Tap to change the wireless network this device will use to connect
to the Internet. Note: The network must be the same as all your
other mydlink devices that you wish to use the same account for.
12 Time Zone Select the time zone to calibrate your device to.
13 Firmware
This displays the installed version of the rmware on your device. Tap to enter
the update settings. You can choose the most suitable time for automatic
updates.
14 MAC ID Identies the device for support issues.
15 Remove Device Tap this button to disconnect this device from your mydlink account.
2
3
4
5
6
7
8
9
10
11
13
14
12
15
1