EasyManuals Logo

D-Link DCS-932L User Manual

D-Link DCS-932L
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11D-Link DCS-932L User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your
wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may
limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The
key to maximizing wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your Network Camera) - each
wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters).
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be
almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal
will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a dierence. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your
access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials
and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade
your wireless signal.
4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection
may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as
possible. The base transmits a signal even if the phone in not in use.

Other manuals for D-Link DCS-932L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-932L and is the answer not in the manual?

D-Link DCS-932L Specifications

General IconGeneral
Maximum resolution640 x 480 pixels
Supported video modes-
Video formats supportedM-JPEG
Supported graphics resolutions640 x 480 (VGA)
White balanceAuto
Minimum illumination1 lx
Sensor typeCMOS
Optical sensor size1/5 \
Digital zoom4 x
Optical zoom- x
Security algorithmsWEP, WPA, WPA2
Ethernet LANYes
Cabling technology10/100Base-T(X)
Supported network protocolsIPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage100-240 V
DC output current1.2 A
DC output voltage+5V
AC input frequency50 - 60 Hz
Power consumption (typical)2 W
Certification- FCC - B - IC - C-Tick - CE
Placement supportedIndoor
Connectivity technologyWired & Wireless
LED typeIR
Dimensions (WxDxH)65.8 x 65 x 126 mm
Minimum RAM128 MB
Minimum processor1.3 GHz
Mac operating systems supportedMac OS X 10.5 Leopard
Cables includedLAN (RJ-45)
Built-in HDDNo
Flash memory4 MB
Internal memory32 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Product colorWhite
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width27.2 mm
Height96 mm
Weight76.9 g

Related product manuals