EasyManuals Logo

D-Link DCS-932L User Manual

D-Link DCS-932L
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58D-Link DCS-932L User Manual
Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless
router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some rewall software
programs may block a DHCP request on newly installed adapters.
If you are connecting to a wireless network at a hotspot (e.g.
hotel, coee shop, airport), please contact an employee or
administrator to verify their wireless network settings.

Other manuals for D-Link DCS-932L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-932L and is the answer not in the manual?

D-Link DCS-932L Specifications

General IconGeneral
Maximum resolution640 x 480 pixels
Supported video modes-
Video formats supportedM-JPEG
Supported graphics resolutions640 x 480 (VGA)
White balanceAuto
Minimum illumination1 lx
Sensor typeCMOS
Optical sensor size1/5 \
Digital zoom4 x
Optical zoom- x
Security algorithmsWEP, WPA, WPA2
Ethernet LANYes
Cabling technology10/100Base-T(X)
Supported network protocolsIPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage100-240 V
DC output current1.2 A
DC output voltage+5V
AC input frequency50 - 60 Hz
Power consumption (typical)2 W
Certification- FCC - B - IC - C-Tick - CE
Placement supportedIndoor
Connectivity technologyWired & Wireless
LED typeIR
Dimensions (WxDxH)65.8 x 65 x 126 mm
Minimum RAM128 MB
Minimum processor1.3 GHz
Mac operating systems supportedMac OS X 10.5 Leopard
Cables includedLAN (RJ-45)
Built-in HDDNo
Flash memory4 MB
Internal memory32 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Product colorWhite
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width27.2 mm
Height96 mm
Weight76.9 g

Related product manuals