10/100 Dual-Speed Switch User’s Guide
Unpacking and Setup
11
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet
included with the switch should first be attached. Attach these
cushioning feet on the bottom at each corner of the device. Allow
enough ventilation space between the switch and any other objects
in the vicinity.
Figure 2.1 DES-1008D Dual-speed Switch installed on a Desktop
or Shelf
Wall Installation
The DES-1008D comes complete with a wall mount kit. This kit
includes two screws and two plastic anchors. For a proper
placement on the wall, follow these steps:
To Next Page
Loading...
