D-Link DES-1228/ME - Page 162

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
158
show vlan
Purpose
Used to display the current VLAN configuration on the Switch
Syntax
show vlan [<vlan_name 32> | vlanid <vidlist> | ports <portlist> ]
Description
This command is used to display summary information about each
VLAN including the VLAN ID, VLAN name, VLAN Type, the
Tagging/Untagging status, and the Member/Non-
member/Forbidden status of each port that is a member of the
VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to
display a summary of settings.
vlanid <vidlist> − Specifies a range of multiple VLAN IDs to be
displayed.
ports <portlist> − Specifies a port or range of ports that will be
displayed.
Restrictions
None.
Example usage:
To display the Switch’s current VLAN settings:
DES-1228/ME:5#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports :
Current Untagged Ports : 1-28
Static Tagged Ports :
Static Untagged Ports : 1-28
Forbidden Ports :
Total Entries : 1
DES-1228/ME:5#
To display the Switch’s current VLAN settings for a specific port:
DES-1228/ME:5#show vlan port 1
Command: show vlan ports 1
Port 1
VLAN ID Untagged Tagged Forbidden Dynamic
------- -------- ------ --------- -------
1 X - - -
DES-1228/ME:5#