D-Link DES-1228/ME - Page 375

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
371
enable bpdu_protection
Purpose
Used to globally enable BPDU attack protection on the Switch.
Syntax
enable bpdu_protection
Description
Use this to enable BPDU attack protection.
NOTE: The BPDU Attack Protection function and Spanning Tree Protocol
for ports are m
utually exclusive. When the STP function is enabled on a
particular port, BPDU Attack Protection cannot be enabled.
Parameters
None.
Restrictions
Only Administrator level, Operator level or Power User level users can issue this
command.
Example usage
To enable BPDU attack protection on the entire Switch:
DES-1228/ME:5# enable bpdu_protection
Commands: enable bpdu_protection
Success.
DES-1228/ME:5#