-2-
Pre-Installing the Windows XP, 2000, Me
and 98/98se Driver
Macintosh users: Proceed to Section 2: Pre-
Installing the Macintosh OS 8/9 Driver
With your computer ON, insert the Driver CD of the DFE-690TXD into
your CD-ROM Drive.
The Autorun Screen will appear as
shown here.
Select “Install Drivers” to pre-
install the drivers onto your
computer.
After a few moments, the “Install Finish” screen
will appear. Select “OK”.
Select “Yes,” if you are prompted to restart your computer. Restart the
computer manually if the prompt does not occur. (Go to Start > Shut
down > Restart.)
Windows XP/2000/Me/98 users: Continue to Section 3.
Macintosh users: Continue to Section 2.
To Next Page
Loading...
Need help?
General
