Using the Configuration Interface
34 D-Link Systems, Inc.
Tools
Admin
The Admin option is used to set a password for access to the Web-based management. By default
there is no password configured. It is highly recommended that you create a password to keep your
new router secure.
Password
Enter a password the will grant access to the Web-based management
interface.
Administration
The name of the router can be changed here.
Enabling this allows you to manage the router from anywhere with an Internet
connection.
The port that will be accessed from the Internet.
The amount of time before the administration session is closed when there
is no activity.
Note: This applies to local or remote administration.
Save and Restore Configuration
This option allows you to save the router configuration to a file on your
computer. Be sure to save the configuration before performing a firmware
upgrade.
Use this option to load previously saved router configuration settings.
Password:
Gateway Name:
Remote Management:
Remote Management
Server Port:
Admin Idle Timeout:
Save Settings:
Restore Settings:
Tools > Admin
To Next Page
Loading...
