D-Link DGS-1008P Quick Install Guide

2
ENGLISH
Package Contents
If any of the above items are missing, please contact your reseller.
• DGS-1008P 8-Port Gigabit Desktop Switch with 4 PoE Ports
• Power Cord
• Power Adapter
• Four (4) Rubber Feet
The setup of the Switch can be performed using the following steps:
• Visually inspect the power jack and make sure that it is fully secured to the
power adapter.
• Do not cover the ventilation holes on the sides of the Switch, and make sure
there is adequate ventilation around it.
• Do not place heavy objects on the switch.
• Place the Switch in a cool and dry environment.
Before You Begin
Connecting the Switch
Step 1
Plug the supplied power adapter into the Switch and the other end into a
power outlet, power strip, or surge protector (recommended). Verify the
Power indicator is lit on the Switch.
Step 2
Connect one end of an Ethernet cable in the device you want to connect to the
Switch and the other end into one of the Ethernet ports on the Switch. Check
the Link lights (LEDs) on both the Switch and the device to verify that the cable
is good and that there is a valid connection. Ports 1-4 can be used to connect
to Power over Ethernet (PoE) devices.
Introduction
The D-Link DGS-1008P is an unmanaged Gigabit PoE switch capable of
providing power to Power over Ethernet (PoE) devices such as network cameras,
Access Points and VoIP phones. The DGS-1008P has 8-ports 10/100/1000Mbps
with 4 ports capable of PoE (Port 1-4) which is useful for home and small oce
businesses who have limited budgets or compact space requirements.

D-Link DGS-1008P Specifications

General

MAC address table	8000 entries
Store-and-forward	Yes
Packet buffer memory	0.256 MB
Packet forwarding rate (1 Gbps)	14880 pps
Packet forwarding rate (10 Mbps)	1488000 pps
Packet forwarding rate (100 Mbps)	148800 pps
10G support	No
Networking standards	IEEE 802.3, IEEE 802.3ac, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology	10BASE-T, 100BASE-T, 1000BASE-T
Switch type	Unmanaged
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Black
Rack mounting	-
LED indicators	Activity, Link, PoE, Power, Speed, Status
Total Power over Ethernet (PoE) budget	68 W
Power over Ethernet (PoE) ports quantity	4
Power over Ethernet (PoE) power per port	30 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Input current	1.5 A
Noise level	0 dB

Weight and Dimensions

Depth	120 mm
Width	190 mm
Height	38 mm