D-Link DGS-1510-28X - Page 41

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
41
Feature Detailed Description
DGS-1510-52X
(HW: A2):
100-240 VAC, 50/60 Hz, 54 Watt
DGS-1510-52XMP:
100-240 VAC, 50/60 Hz, 589 Watt
Fans
The IC Sensor detects the temperature on the switch automatically,
and adjusts the speed. The amount of fans that are installed per
Switch are listed below:
DGS-1510-20:
1 fan
DGS-1510-28:
1 fan
DGS-1510-28P:
2 fans
DGS-1510-28X:
1 fan
DGS-1510-28XMP:
2 fans
DGS-1510-52:
2 fans
DGS-1510-52X
(HW: A1):
2 fans
DGS-1510-52X
(HW: A2):
1 fan
DGS-1510-52XMP:
4 fans
Maximum Power
Consumption
DGS-1510-20:
20.3 Watt
DGS-1510-28:
21.2 Watt
DGS-1510-28P:
29.0 Watt (PoE off) and 238.7 Watt (PoE on)
DGS-1510-28X:
22.3 Watt
DGS-1510-28XMP:
38.4 Watt (PoE off) and 436.3 Watt (PoE on)
DGS-1510-52:
38.4 Watt
DGS-1510-52X
(HW: A1):
44.22 Watt
DGS-1510-52X
(HW: A2):
48 Watt
DGS-1510-52XMP:
53.9 Watt (PoE off) and 468.6 Watt (PoE on)
Standby Power
Consumption
DGS-1510-20:
11.4 Watt (100V) and 12.2 Watt (240V)
DGS-1510-28:
14.6 Watt (100V) and 15.2 Watt (240V)
DGS-1510-28P:
22.7 Watt (100V) and 21.0 Watt (240V)
DGS-1510-28X:
14.6 Watt (100V) and 15.2 Watt (240V)
DGS-1510-28XMP:
24.5 Watt (100V) and 28.2 Watt (240V)
DGS-1510-52:
27.3 Watt (100V) and 27.6 Watt (240V)
DGS-1510-52X
(HW: A1):
28.6 Watt (100V) and 28.9 Watt (240V)
DGS-1510-52X
(HW: A2):
30.4 Watt (100V) and 30.3 Watt (240V)
DGS-1510-52XMP:
38.0 Watt (100V) and 38.6 Watt (240V)
Temperature Operating:
-5 °C ~ 50 °C (23 °F ~ 122 °F)
Storage:
-20 °C ~ 70 °C (-4 °F ~ 158 °F)
Humidity Operating:
0 % ~ 95 % (non-condensing)
Storage:
0 % ~ 95 % (non-condensing)