DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
50
Redundant Power Supply (RPS) Cable
When connecting the Switch to a Redundant Power Supply, an RPS cable is necessary. Please
review these products for matching cable pin assignment. The following diagrams and tables show
the standard RPS receptacle/connector and their pin assignments.
22-pin DC power cable
Figure B–2 Redundant Power Supply (RPS) 22-pin DC Power Cable
RPS 22-pin DC Power Cable Pin Assignments
Pin Device DPS-700
1 -54Vrtn -54Vrtn
2 -54V -54V
3 +12V +12V
4 +12V +12V
5 +12V +12V
6 +12V +12V
7 NC/GND GND
8 +12Ven +12Ven
9 LS-54V LS-54V
10 -54V -54V
11 -54Vrtn -54Vrtn
12 GND NC/GND
13 GND GND
14 RPS Present Status_2
15 Status_1 RPS PG
16 Status_2 RPS Present
17 RPS PG Status_1
To Next Page
Loading...
