D-Link DGS-1510-28X - Page 43

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
43
Feature Detailed Description
DGS-1510-52/52X (HW: A1 and A2)/52XMP: 3 MB per device
Wire Speed
Wire speed operation on all FE/GE/10GE ports
Switching Capacity DGS-1510-20:
76 Gbps
DGS-1510-28:
92 Gbps
DGS-1510-28P:
92 Gbps
DGS-1510-28X:
128 Gbps
DGS-1510-28XMP:
128 Gbps
DGS-1510-52:
140 Gbps
DGS-1510-52X
(HW: A1):
176 Gbps
DGS-1510-52X
(HW: A2):
176 Gbps
DGS-1510-52XMP:
176 Gbps
Packet Forwarding Rate
(64 Byte System)
DGS-1510-20:
56.54 Mpps (Mega Packets Per Second)
DGS-1510-28:
68.45 Mpps (Mega Packets Per Second)
DGS-1510-28P:
68.45 Mpps (Mega Packets Per Second)
DGS-1510-28X:
95.24 Mpps (Mega Packets Per Second)
DGS-1510-28XMP:
95.24 Mpps (Mega Packets Per Second)
DGS-1510-52:
104.16 Mpps (Mega Packets Per Second)
DGS-1510-52X
(HW: A1):
130.95 Mpps (Mega Packets Per Second)
DGS-1510-52X
(HW: A2):
130.95 Mpps (Mega Packets Per Second)
DGS-1510-52XMP:
130.95 Mpps (Mega Packets Per Second)
Priority Queues
8 Priority Queues per port
MAC Address Table
Supports the following:
• Up to 16,384 MAC addresses
• Up to 512 static MAC addresses
Physical Stacking
Supports the following:
• Two dedicated stacking ports on the front panel of the Switch.
The last two SFP+ ports are used for physical stacking.
• Provides bi-directional redundant stacking topology
• Linear and Ring stacking topologies
• Up to 40 Gbps full-duplex bandwidth
• Up to 6 units per stack
• Backup master
• Inter-stacking trunking and mirroring
Virtual Stacking / Clustering
Supports the following:
• D-Link Single IP Management version 1.6
• Manage up to 32 devices in a virtual stack with a single IP
address