DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
9
Figure 1-8 Front panel view of a DGS-3000-52L Switch
Figure 1-9 Front panel view of a DGS-3000-52X Switch
Ports
The following ports are available on the front panel of switches in this series:
DGS-3000-10L:
o Eight Copper RJ45 Ports (10/100/1000Mbps)
o Two SFP Ports (1000Mbps)
o One RJ45 Console Port
DGS-3000-20L:
o Sixteen Copper RJ45 Ports (10/100/1000Mbps)
o Four SFP Ports (1000Mbps)
o One RJ45 Console Port
DGS-3000-28L:
o Twenty-four Copper RJ45 Ports (10/100/1000Mbps)
o Four SFP Ports (1000Mbps)
o One RJ45 Console Port
DGS-3000-28LP:
o Twenty-four Copper PoE RJ45 Ports (10/100/1000Mbps)
o Four SFP Ports (1000Mbps)
o One RJ45 Console Port
DGS-3000-28X:
o Twenty-four Copper RJ45 Ports (10/100/1000Mbps)
o Four SFP/SFP+ Ports (1/10Gbps)
o One RJ45 Console Port
DGS-3000-28XMP:
o Twenty-four Copper PoE RJ45 Ports (10/100/1000Mbps)
o Four SFP/SFP+ Ports (1/10Gbps)
o One RJ45 Console Port
DGS-3000-28XS:
o Twenty-four SFP Ports (10/100/1000Mbps)
o Four SFP+ Ports (1/10Gbps)
o One RJ45 Console Port
DGS-3000-52L:
o Forty-eight Copper PoE RJ45 Ports (10/100/1000Mbps)
o Four SFP Ports (1000Mbps)
o One RJ45 Console Port
DGS-3000-52X: