D-Link DGS-3000 series - LED Indicators

DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
40
Feature
Description
64 Byte System Packet Forwarding
Rate
DGS-3000-10L: 14.88 Mpps (Mega Packets Per Second)
DGS-3000-20L: 29.76 Mpps (Mega Packets Per Second)
DGS-3000-28L: 68.45 Mpps (Mega Packets Per Second)
DGS-3000-28LP: 68.45 Mpps (Mega Packets Per Second)
DGS-3000-28X: 95.24 Mpps (Mega Packets Per Second)
DGS-3000-28XMP: 95.24 Mpps (Mega Packets Per Second)
DGS-3000-28XS: 95.24 Mpps (Mega Packets Per Second)
DGS-3000-52L: 104.16 Mpps (Mega Packets Per Second)
DGS-3000-52X: 130.95 Mpps (Mega Packets Per Second)
Priority Queues
8 Priority Queues per port.
MAC Address Table
Supports 8K MAC addresses.
Supports 512 Static MAC addresses.
Virtual Stacking / Clustering
Supports D-Link Single IP Management version 1.6.
Manage up to 32 devices in a virtual stack with a single IP address.
LED Indicators
Location
LED Indicative
Color
Status
Description
Per Device
Power
Green
Solid Light
Power on
Blinking
Performing System Self-test.
Light off
Power off
Console
Green
Solid Light
Console on
Light off
Console off
RPS
Green
Solid Light
RPS in use
Light off
RPS off
Fan
Green
Solid Light
Diagnostics pass. Normal operation.
Red
Solid Light
Fan failure
Port LED Mode
Indicator
(DGS-3000-28LP
and DGS-3000-
28XMP Only)
An LED Mode Select Button to switch two modes in turn for all
10/100/1000Mbps ports on the:
 Link/Act/Speed Mode (1)
 PoE Mode (2)
Green
Solid Light (1)
A LED Mode Select Button to switch
Link/Act/Speed Mode.
Solid Light (2)
A LED Mode Select Button to switch
PoE Mode.
LED per Copper
RJ45 Port
(10/100/1000Mbps)
Link/Act/Speed
Mode
Green
Solid Light
When there is a secure connection (or
link) to 1000Mbps Ethernet device at
any of the ports.
Blinking
When there is reception or
transmission of data occurring at
1000Mbps.
Amber
Solid Light
When there is a secure connection (or
link) to 10/100Mbps Ethernet device at
any of the ports.
Blinking
When there is reception or
transmission of data occurring at