DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DGS-3024:4#
show trusted_host
Purpose Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
Syntax
show trusted_host {<ipaddr>}
Description This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
Parameters
<ipaddr> − The IP address of the trusted host.
Restrictions None.
Example Usage:
To display the list of trust hosts:
DGS-3024:4#show trusted_host
Command: show trusted_host
Management Stations
IP Address
-----------------------
10.53.13.94
Total Entries: 1
DGS-3024:4#
delete trusted_host
Purpose
Used to delete a trusted host entry made using the create
trusted_host command above.
Syntax
delete trusted _host <ipaddr>
Description This command is used to delete a trusted host entry made using the
create trusted_host command above.
Parameters
<ipaddr> − The IP address of the trusted host.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete a trusted host with an IP address 10.48.74.121:
42
To Next Page
Loading...
