DGS-3024 Layer 2 Switch CLI Reference Manual
enable gvrp
Purpose Used to enable GVRP on the Switch.
Syntax
enable gvrp
Description
This command, along with disable gvrp below, is used to enable
and disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DGS-3024:4#enable gvrp
Command: enable gvrp
Success.
DGS-3024:4#
disable gvrp
Purpose Used to disable GVRP on the Switch.
Syntax
disable gvrp
Description
This command, along with enable gvrp above, is used to enable
and disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DGS-3024:4#disable gvrp
Command: disable gvrp
Success.
DGS-3024:4#
92
To Next Page
Loading...
