DGS-3024 Layer 2 Switch CLI Reference Manual
show vlan
Purpose Used to display the current VLAN configuration on the Switch
Syntax
show vlan {<vlan_name 32>}
Description This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is a
member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to display
a summary of settings.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DGS-3024:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1-24
Static ports : 1-24
Untagged ports : 1-24
Forbidden ports :
Total Entries : 1
DGS-3024:4#
show gvrp
Purpose Used to display the GVRP status for a port list on the Switch.
Syntax
Description This command displays the GVRP status for a port list on the Switch
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP status
is to be displayed.
Restrictions None.
Example usage:
To display GVRP port status:
DGS-3024:4#show gvrp 1-5
Command: show gvrp 1-5
Global GVRP : Disabled
Port PVID GVRP Ingress Checking Acceptable Frame Type
------ ---- -------- ---------------- ---------------------------
1 1 Disabled Enabled All Frames
93
To Next Page
Loading...
