DGS-3024 Gigabit Ethernet Switch Manual
SHA - Specifies that the HMAC-SHA authentication protocol will be used. This field is
only operable when the Encryption field has been checked. This field will require the
user to enter a password.
Priv-Protocol
None - Specifies that no authorization protocol is in use.
DES - Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-
56) standard. This field is only operable when the Encryption field has been checked.
This field will require the user to enter a password between 8 and 16 alphanumeric
characters.
To implement changes made, click Apply. To return to the SNMP User Table, click the Show All SNMP User Table Entries
link.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by a
remote SNMP manager. To view the SNMP View Table window, open the SNMP Manager folder under Management
and click the SNMP View Table entry. The following window should appear:
Figure 9- 6. SNMP View Table window
To delete an existing SNMP View Table entry, click the
in the Delete column corresponding to the entry you wish to
delete. To create a new entry, click the Add button and a separate window will appear.
109
To Next Page
Loading...
