D-Link DGS-3024 - Time Zone and DST

DGS-3024 Gigabit Ethernet Switch Manual
Month
Enter the current month, if you would like to update the system clock.
Day
Enter the current day, if you would like to update the system clock.
Time in HH MM SS
Enter the current time in hours and minutes, if you would like to update the system
clock.
Click Apply to implement your changes.
Time Zone and DST
The following are windows used to configure time zones and Daylight Savings time settings for SNTP. Open the
Configuration folder, then the SNTP Setting folder and click on the Time Zone and DST link, revealing the following
window.
Figure 7- 37. Time Zone and DST Settings window
The following parameters can be set:
Parameter Description
Time Zone and DST Settings
61