DGS-3024 Gigabit Ethernet Switch Manual
Figure 7- 35. GVRP Settings window
The following fields can be set:
Parameter Description
From/To
These two fields allow you to specify the range of ports that will be included in the
VLAN that you are creating using the GVRP Settings window.
Ingress Check
This field can be toggled using the space bar between Enabled and Disabled.
Enabled enables the port to compare the VID tag of an incoming packet with the
PVID number assigned to the port. If the two are different, the port filters (drops) the
packet. Disabled disables ingress filtering. Ingress Checking is Disabled by default.
58
To Next Page
Loading...
