D-Link DGS-F1010P-E - Detailed Product Specifications; Switch Modes and Network Port Details; Performance and Standards; LED Indicators, PoE Pins, and Power Specifications

1.6 Product Specifications
Switch Modes
Extend: Supports long reach PoE delivery, up to 250m.
(Cat 5 or better cabling is recommended)
VLAN: Isolates ports from each other. Adds security and improves network
performance by constraining broadcast traffic.
QOS: Introduces application prioritisation. Traffic with higher priority (e.g.
Voice over IP) will be forwarded ahead of the queue.
PoE: Automatically restarts a remote device by disabling and re-enabling PoE
on the port if it detects the remote device has locked up (no incoming traffic).
Network Port
8 x 10/100/1000Mbps PoE RJ45 ports (Port 1– Port 8)
2 x10/100/1000Mbps RJ45 Uplink ports (Port 9 – Port 10)
Transfer Rate
1000Mbps full Duplex, 10 or 100/1000Mbps Half Duplex
Standards
IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Performance
Bandwidth: 20Gbps (non-blocking)
Network delay (100to100 Mbps): maximum 20μs (using 64 byte packet)
Network delay (1000 to 1000M bps): maximum 10μs (using 64 byte packet）
Frame filtering and transmission rate:
10M port maximum 14,800pps
100M port maximum 148,800pps
1000M port maximum 1,488,000pps
LED indicator
Power
RESV
LINK/ACT
PoE pins
1/2(+), 3/6(-)
Power
Max power for single port 30W
External power adapter: 96W
Dimensions
Size L x W x H: 184mm x 94mm x 27mm
Weight 0.95kg
Environment
Operating Temperature: 0° - 40°C
Operating Humidity: 10% - 90%, Non-condensing
Safety
CE/ROHS/FCC