D-Link DHP-W310 - LAN Settings

17D-Link DHP-W310AV User Manual
Section 3 - Conguration
LAN Settings
This section will allow you to change the local network settings of the DHP-W310AV and to congure the DHCP settings.
Enter the Device Name of this DHP-W310AV.
You will use this name to connect to it
through a web browser. The default name
is listed on your Wi-Fi Conguration Card.
Use the drop-down menu to select Dynamic
IP (DHCP) to automatically obtain an IP
address on the LAN/private network. For
Static IP setup, see the next page.
Your Internet Service Provider (ISP) may
require this to be set a certain way for
Internet access. Contact your ISP regarding
such requirements.
This shows the current IPv6 address of the
DHP-W310AV on your network.
Click Save Settings to save and activate the
new changes.
Device Name:
LAN Connection
Type:
IPv6 Connection
Type:
LAN IPv6 Address
Settings:
Save Settings: