Need help?Do you have a question about the D-Link DHP-W306AV and is the answer not in the manual?
Power| power input | 240 V AC, 50/60 Hz |
|---|---|
| power saving mode | supported |
Operating Environment| operating temperature | 0º to 40ºC (30º to 104ºF) |
|---|---|
| operating humidity | 10% to 95% non-condensing |
Data Transmission| powerline data rate | 200 Mbps (PHY rate) |
|---|---|
| ethernet data rate | 10/100 Mbps (autonegotiation) |
| wireless data rate | up to 300 Mbps |
Frequency and Modulation| powerline frequency band | 2 MHz to 30 MHz |
|---|---|
| wireless frequency range | 2.4 GHz to 2.497 GHz |
| powerline modulation scheme | OFDM Symbol Modulation |
Weight and Dimensions| dimensions | 105 x 70 x 52 mm (4.1 x 2.8 x 2.0 inches) |
|---|---|
| weight | 208 g (0.46 lb) |
Describes the RJ-45 Ethernet port and the ON/OFF button.
Details the Reset Button, WPS/Eny LED, Encryption Button, and WPS Button.
Explains the Power, Ethernet, Wireless, and Powerline AV LEDs.
Provides instructions for plugging in and connecting the Powerline AV adapter using Ethernet.
Offers guidelines for maximizing wireless range and avoiding interference.
Explains the function of the Eny button for adding devices and managing network states.
Details how to create a new powerline network and add devices to an existing one.
Introduces the web-based utility for configuring powerline settings and QoS.
Describes how to use the wizard for wireless network setup.
Explains how to add wireless devices using the PIN or PBC methods.
Details how to configure LAN connection type using DHCP.
Instructions for manually assigning a static IP address to the network adapter.
Details saving current settings to a file and loading previously saved configurations.
Guides on how to upgrade the device firmware and language pack.
Covers setting the time zone, daylight saving, and NTP server.
Explains how to select log types and configure log settings.
Explains Wired Equivalent Privacy (WEP) and its encryption methods.
Details Wi-Fi Protected Access (WPA) and its improvements over WEP.
Provides step-by-step instructions to enable and configure WEP security.
Guides on setting up WPA/WPA2 Personal security with a passphrase.
Details configuration for WPA/WPA2 Enterprise security using a RADIUS server.
Explains how to configure WPS using Windows 7.
Guides on connecting to a WEP-secured network in Windows Vista.
Guides on connecting to a WPA-PSK secured network in Windows Vista.
Guides on connecting to a WEP-secured network in Windows XP.
Guides on connecting to a WPA-PSK secured network in Windows XP.
Solutions for issues accessing the device's web interface.
Explains how to reset the access point if the administrator password is forgotten.
Addresses issues with Powerline AV devices not detecting each other.
Troubleshooting steps for when a Powerline AV device fails to start.
Defines wireless technology and how it connects devices.
Explains the working principles of wireless networks like WLAN.
Describes typical users and scenarios for wireless technology in home and office.
Provides tips for optimizing wireless network performance and placement.
Explains the two main wireless networking modes: Infrastructure and Ad-Hoc.
Step-by-step guide to verify the device's IP address using the command prompt.
Instructions for manually assigning a static IP address to the network adapter.
To Next Page
