D-Link DHP-W306AV - Configure WPA;WPA2 Enterprise Security

47D-Link DHP-W306AV User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the access point (192.168.0.50).
Click on  and then click  on the left
side.
2. Next to , select ,
   , or  
.
3. Next to , select , , or .
4. Next to , select .
5. Next to , enter the IP Address of your RADIUS
server.
6. Next to , enter the port you are using with your RADIUS server. 1812 is the default port.
7. Next to , enter the security key.
8. Click  to save your settings.
Configure WPA/WPA2 Enterprise