35D-Link DHP-W306AV User Manual
Section 3 - Configuration
Firmware
You can upgrade the rmware of the access point from this page. Make sure the rmware you would like to use is
on the local hard drive of your computer. Click to locate the rmware le to be used for the update. Please
check the D-Link support site for rmware updates at . You can download rmware upgrades
to your hard drive from the D-Link support site.
Firmware
Information:
Firmware
Upgrade:
Language Pack
Upgrade:
Click on the button to nd out if there
is an updated rmware or language pack version.
If a new version exists, download the new rmware
to your hard drive.
After you have downloaded the new rmware, click
to locate the rmware update on your
hard drive. Click to complete the rmware
upgrade.
To upgrade the language pack, follow these steps:
1. Click the button to locate the D-Link
language pack upgrade le on your computer.
Language pack le extension will be *.lng
2. Once you have found the le, click the
button to begin the language pack upgrade
process. This can take a minute or more.
3. Wait for the device to reboot. This process can
take about 75 seconds.
To Next Page
Loading...
