EasyManua.ls Logo

D-Link DI-701 iShare User Manual

D-Link DI-701 iShare
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
- 1 -
DI-701 iShare Internet Gateway
User Manual
Question and Answer IconNeed help?

Do you have a question about the D-Link DI-701 iShare and is the answer not in the manual?

D-Link DI-701 iShare Specifications

General IconGeneral
BrandD-Link
ModelDI-701 iShare
CategoryNetwork Router
LanguageEnglish

Summary

FCC Compliance Statements

FCC Part 15 Registration

Details compliance with FCC Part 15 rules for digital devices.

Introduction to DI-701 iShare Internet Gateway

Product Features

Lists key features of the DI-701 iShare Internet Gateway.

Technical Specifications

Provides technical specifications for protocols, ports, and connectors.

How the Gateway Works

Explains the operational principle and network setup of the gateway.

Hardware Installation Guide

Component Identification

Identifies and describes front panel LEDs and rear panel ports.

Required Hardware

Lists essential hardware, both included and self-prepared, for setup.

Connection Procedures

Illustrates and describes the physical connections for WAN and LAN.

System Environment Requirements

Software Prerequisites

Specifies the operating systems and software needed for configuration.

Default Network Settings

Details the default IP addresses and DHCP server settings.

ISP Information Gathering

Explains how to gather and use ISP-assigned network configuration details.

Configuration Settings Overview

Preparation for Configuration

Outlines the two configuration methods: GUI and Terminal Program.

Host Computer Setup

Guides on setting up the host computer's TCP/IP properties for configuration.

GUI Configuration Steps

Step-by-step instructions for configuring the gateway using the Windows GUI.

Terminal Program Configuration

Terminal Connection Setup

Instructions for connecting and starting a terminal session to the gateway.

Static Global Port Configuration (TP)

Details how to configure static global port settings via terminal.

Local Port Configuration (TP)

Steps to modify local port settings using the terminal interface.

Setup and Diagnosis Procedures

TCP/IP Network Diagnostics

Explains using WINIPCFG and PING for network troubleshooting.

Connectivity Checks

Covers cable, device, ISP, and internet connectivity verification.

Terminal Command Reference

Password Management (passwd)

Describes the command to change the administrator password.

Configuration Display (show)

Explains how to display the current device configuration.

Device Configuration (set)

Details the command for configuring various device parameters.

Virtual Server Mapping (vserv)

Explains the command for setting up internal virtual server mapping.

IP Lease Management (release, renew)

Manages global port configuration by releasing or renewing IP leases.

User and Session Monitoring

Lists active users and internet sessions through the device.

Firmware Upgrade Procedures

Firmware Upgrade System Requirements

Lists the prerequisites for performing a firmware upgrade.

Firmware Upload Process

Step-by-step guide for uploading new firmware to the device.

Related product manuals