D-Link DIR-600 - Firewall Rules

49D-Link DIR-600 User Manual
Section 3 - Conguration
Use the Firewall Rules section to create/modify rewall rules.
Firewall Settings
Firewall Rules
Check the box on the left side to enable the rewall rule.
Enter a name to identify the rewall rule.
Use the drop-down menu to Allow or Deny transport of
the data packets according to the criteria dened in the
rewall rule.
Use the Source drop-down menu to specify the interface
that connects to the source IP addresses of the rewall rule.
Enter the rst source IP address in the range in the adjacent
top IP Address eld.
Enter the last source IP address in the range in the IP
Address eld below.
Use the Dest drop-down menu to specify the interface that
connects to the destination IP addresses of the rewall rule.
Enter the rst destination IP address in the range in the
adjacent top IP Address eld.
Enter the last destination IP address in the range in the IP
Address eld below.
Enable Checkbox:
Name:
Action:
Source:
Dest: