D-Link DIR-600 - Autoconiguration(Stateless;Dhcpv6)

61D-Link DIR-600 User Manual
Section 3 - Conguration
IPv6
Autoconguration(Stateless/DHCPv6)
Select Autoconguration(Stateless/DHCPv6) from the My IPv6 Connection is drop-down menu if your Router will use the IPv6
Autoconguration(Stateless/DHCPv6) method to connect to the Internet.
Select either Obtain DNS server address automatically
or Use thefollowing DNS Address.
Select DHCP-PD to acquire the IPv6 prex for the Router.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Use this section to congure the IPv6 autoconguration
settings.
IPv6 DNS Settings:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6
Link-Local Address:
LAN Address
Autoconguration
Settings: