D-Link DIR-600 - Static Ipv6 (Stateful)

60D-Link DIR-600 User Manual
Section 3 - Conguration
IPv6
Static IPv6 (Stateful)
To congure the Router to use a Static IPv6 Stateful connection, congure the parameters in the LAN Address Autoconguration
Settings section as described below:
Check to enable the Autoconguration feature.
Select the Stateful(DHCPv6) option from the drop-down
menu.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the IPv6 Address Lifetime (in minutes).
Enable
Autoconguration:
Autoconguration
Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
IPv6 Address
Lifetime:
Click the Save Settings button to save any changes made.