D-Link DIR-600 - Static Ipv6 (Stateless)

59D-Link DIR-600 User Manual
Section 3 - Conguration
IPv6
Static IPv6 (Stateless)
To congure the Router to use a Static IPv6 Stateless connection, congure the parameters in the LAN Address Autoconguration
Settings section as described below:
Check to enable the Autoconguration feature.
Select the Stateless option from the drop-down menu.
Enter the Router Advertisement Lifetime (in minutes).
Enable
Autoconguration:
Autoconguration
Type:
Router
Advertisement
Lifetime:
Click the Save Settings button to save any changes made.