28D-Link DIR-635 User Manual
Section 3 - Configuration
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if you are using 802.11n wireless clients only.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-635. If Invisible is
selected, the SSID of the DIR-635 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DIR-635 in order to connect to it.
Refer to page 68 for more information regarding wireless security.
Channel Width:
Visibility Status:
Wireless Security:
To Next Page
Loading...
