72D-Link DIR-635 User Manual
Section 4 - Security
CongureWPA-Personal(PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based conguration by opening a web browser and
entering the IP address of the router (192.168.0.1).
2. Click Setup and then click Wireless Settings.
3. Security Mode: Select WPA-Personal for this mode option.
4 WPA Mode: Select Auto, WPA2 Only, or WPA Only. Select Auto, if you
have wireless clients using both WPA and WPA2.
5. Cypher Type: Select TKIP and AES, TKIP, or AES.
6. Group Key Update Interval: Enter the time interval required for the group
key to broadcast and multicast data is changed (3600 is default).
7. Pre-Shared Key: Enter a key (passphrase). The key is entered as a pass-
phrase in ASCII format at both ends of the wireless connection. The pass-
phrase must be between 8-63 characters.
8. Click Save Settings to save your settings. If you are conguring the router
with a wireless adapter, you will lose connectivity until you enable WPA-
PSK on your adapter and enter the same passphrase as you did on the
router.
To Next Page
Loading...
