D-Link DIR 635 B3 - Configuration; System Settings

58D-Link DIR-635 User Manual
Section 3 - Configuration
Use this option to save the current router
conguration settings to a le on the hard disk
of the computer you are using. Click Save and
you will see a le dialog, where you can select
a location and le name for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to nd a previously save le
of conguration settings. Then, click Load to
transfer those settings to the router.
This option will restore all conguration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conguration
settings, click Save.
Select to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
System Settings