D-Link DIR-645 - Page 104

100D-Link DIR-645 User Manual
Section 3 - Software Conguration
The following parameters will be available for conguration:
Enable: Tick this option to enable the Dynamic DNS feature
for IPv6 hosts.
IPv6 Address: Enter the IPv6 Address used here. Alternatively,
the user can select the Computer Name for the
drop-down list and click on the << button to add
it the IPv6 Address eld.
Host Name: Enter the IPv6 host name used for the DDNS
account here.
Click on the Save button to add the IPv6 host to the IPv6 Dynamic DNS
List.
Click on the Clear button to clear the information entered in the elds.