D-Link DIR-645 - Guest Zone

87D-Link DIR-645 User Manual
Section 3 - Software Conguration
Guest Zone
On this page, the user will be able to congure the Guest Zone, settings. The guest zone provide a separate network zone for guest to access
Internet.
The following parameters will be available for conguration:
Enable Guest
Zone:
Tick this option to enable the Guest Zone feature
for the frequency band 2.4GHz. Use the drop-
down menu to schedule the time that the Firewall
rule will be enabled. The schedule may be set to
Always, which will allow the particular service to
always be enabled. Click the New Schedule button
to create your own times in the Schedules page.
Wireless Band: Displays the frequency band used.
Wireless
Network Name:
The Service Set Identier (SSID) is the name of
your wireless network. Create a name using up to
32 characters. The SSID is case-sensitive.
Enable Routing
Between Zones:
Tick this option to enable routing between guest zones.
Security Mode: The security mode enables the user to congure wireless security for this wireless guest zone. For more information about
wireless security, refer to the Wireless Settings page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.