D-Link DIR-809 - 2.4 G;5 G Repeater

84D-Link DIR-809 User Manual
Section 3 - Conguration
2.4G/5G Repeater
Click 2.4G Repeater or 5G Repeater (depending on what band was chosen in the Device
Mode settings) on the navigation menu to congure your repeater settings. This page is
used to congure the parameters for the wireless repeater.
Step 1
Click Site Survey. Sites surveyed will be displayed in a list. Select the wireless network you
would like to extend and click Next.
Step 2
This page will prompt you to congure the host network’s security settings. Select the correct
type of security and enter the wireless password. Click Next to continue.
Step 3
Once you have specied the wireless settings, the wizard is complete. Note that once
you click Finish you may lose access to the gateway. You can access it either by going to
dlinkrouter.local in a browser or by connecting to its newly assigned IP address. Click Finish
to complete the wizard.