DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Configuring via Web-based Interface
Parameter Description
Encryption key
Specify an encryption key for data exchange between the SNMP
agent and SNMP manager. The field is displayed if the DES or
AES value is selected from the Encryption protocol drop-down
list.
MIB subtree
Specify a MIB element which will be available to the SNMP
manager.
Click the SAVE button.
To edit a user, select the relevant line in the table. In the opened window, change the needed values
and click the SAVE button.
To remove a user, select the checkbox located to the left of the relevant line in the table and click
the DELETE button ( ).
After specifying the needed parameters, click the APPLY button.
In order to disable the SNMP agent, in the Configuration section, move the Enable SNMP
switch to the left and click the APPLY button.
Page 143 of 210
To Next Page
Loading...
