DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Configuring via Web-based Interface
Parameter Description
Name
A name for the tunnel for easier identification. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US
keyboard layout.
7
IP version
An IP version.
Dynamic IPsec
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one IPsec tunnel only. Connection requests via this
tunnel can be sent by a remote host only.
Type
Select an identification method for the remote host (router) from the
drop-down list:
• Address: The remote host is identified by its IP address.
• FQDN: The remote host is identified by its domain name.
The drop-down list is displayed if the Dynamic IPsec switch is
moved to the left.
Remote host
Enter the remote subnet VPN gateway IP address if the Address
value is selected from the Type drop-down list.
Enter the remote subnet VPN gateway domain name if the FQDN
value is selected from the Type drop-down list.
The field is available for editing if the Dynamic IPsec switch is
moved to the left.
Remote identifier
A remote host identifier to establish connection over IPsec with
particular hosts only. To establish connection, DIR-822 remote
identifier value should correspond to the local identifier value
specified in the settings of the remote host. Use an IP address, domain
name, or certificate CN. Optional.
Remote port
A port of the remote host, that is used for IPsec packets exchange
during the First Phase of the connection. If the field is left blank, port
500 is used. If the field is left blank and the network address
translation (NAT) function is used for the connection, port 4500 is
used.
Pre-shared key
A PSK key for mutual authentication of the parties. Click the Show
icon ( ) to display the entered key.
7 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Page 172 of 235
To Next Page
Loading...
