28
Network
LAN Setting
Here you can configure the parameters for local
area network.
IP Address: The IP address can be set.
Subnet Mask: The Subnet mask can be set.
Default Gateway: Default Gateway of the Router.
WORK MODE: Can be set to
OFF/Client/Server/DHCP Relay.
DHCP Client Range: Set an IP Range for your DHCP
clients.
Lease Time: Set a Time limit the DHCP will lease
the IP.
DNS: DNS address of Router.
Static DHCP: Set a Static DHCP (Enable/Disable, IP
address, MAC address).
Domain Name: Enter a domain name,
Eg: dlinkrouter.local
802.1d Spanning Tree: Enable Spanning tree
On/Off.
To Next Page
Loading...
