50
WPS
Here you can change the settings for 5Ghz WPS (Wi-Fi Protected Setup), using this feature you can let your wireless client connect and
synchronize all its settings and connect to the Router.
Disable WPS: Choose to Disable/Enable the WPS Function
WPS Status: This will state if the device is configured or unconfigured. (You can manually reset the configuration here)
Here you can change the settings for WPS (Wi-Fi Protected Setup), using this feature you can let your wireless client connect and synchronize
all its settings and connect to the Router.
Auto-lock-down state: Lock or Unlock your wireless network to prevent unauthorized access and keep your data secure.
Push Button Configuration: Connect multiple devices to the network and enable data encryption by pushing the button.
STOP WSC: Stop the WPS function by pressing this button.
Connected State: Shows the current State of the WPS connection as (Started/Stopped)
To Next Page
Loading...
