46
Wireless (5GHz)
Basic settings
Here we will configure the settings for the 5Ghz Network.
Disable Wireless LAN Interface: Set the Wireless state to
Enabled or Disabled.
Country or Region: Choose your country of origin
Band: Select a wireless band
Mode: Select mode AP/Client
SSID: Set a name for your wireless network
Channel Width: Select the desired channel width
Control Sideband: Set the Sideband to Upper or Lower.
Channel Number: Select a wireless channel number
between 1 -13 ( recommended to use 1/6/11)
RX Chain Power Safe: Enable/Disable
Broadcast SSID: Enable to Broadcast the SSID (Wi-Fi
Name)
WMM: Turn Wi-Fi Multimedia on/off.
Data Rate: Set the Rate to Auto or a selected value.
Associated clients: Click to show Active wireless clients
Enable Universal Repeater mode: Tick to Enable
Universal Repeater mode.
To Next Page
Loading...
